You are buying a set of 2 HUB CENTRIC automotive wheel spacer adapters that are 1" thick. These fit a 5x100mm stud pattern with a Center Bore of 56.1mm and adapt 5x45 (5x114.3) wheels onto your vehicle . This includes two spacers/rings, which is enough to widen one axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (56.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are purchasing a set of 4 ATV wheel spacers adapters, enough to widen wo axles 2.00" total (one spacer in the kit for each wheel on the axle). These wheel spacers are 1.00" per side will fit most any ATV with a 4x110 factory stud pattern where you are trying to use 4x137 WHEELS. A wider wheelbase on your bike will offer more stability for jumping and cornering, and also allow you to add larger wheels without lifting your bike.
Please measure your studs (110mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (137mm diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 4x110 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Below some of the models these will fit:
Can-Am/Bombardier:
2000-2005 Quest 500 4WD
2002-2005 Quest 650 4WD
2007-2012 DS 450 Rear
Honda:
2004-2009 TRX 400 Rancher AT 4WD
2004-2009 TRX 420 Rancher AT 4WD
1996-2006 TRX 400 Foreman 4WD
1998-2004 TRX 450 Foreman 4WD
2005-2013 TRX 500 Foreman 4WD
2001-2009 TRX 500 Rubicon 4WD
2003-2007 TRX 650 Rincon
2006-2014 TRX 680 Rincon
Kawasaki:
2008-2012 KFX450R 2WD Rear
2006-2012 Brute Force 650i 4WD
2005-2014 Brute Force 750i 4WD
Suzuki:
2008-2012 King Quad 400 4WD
2008-2012 King Quad 500 4WD
2007-2009 King Quad 450 4WD
2006-2014 King Quad 700 4WD
2006-2014 King Quad 750 4WD
Yamaha:
1987-2008 Big Bear 350 4WD
1987-2014 Big Bear 400 4WD
2007-2014 Grizzly 350 4WD
2007-2014 Grizzly 450 4WD
2009-2013 YFM 550 Grizzly 4WD
2002-2010 YFM 660 Grizzly 4WD
2007-2014 YFM 700 Grizzly 4WD
2004-2014 YFM 450 Rhino 4WD
2004-2014 YFM 660 Rhino 4WD
2004-2014 YFM 700 Rhino 4WD
Installation:
This set of spacers will fit most any ATV with 4x110 bolt spacing.. Simply remove your wheels, bolt the spacers onto the wheel studs with your existing lugs, and use the new studs and lugs to mount your new 4x137 wheels back on! It is that simple.
Warranty:
We offer a lifetime warranty on all our products.
You are purchasing a set of 2 ATV wheel spacers adapters, enough to widen one axle 2.00" total (one spacer in the kit for each wheel on the axle). These wheel spacers are 1.00" per side will fit most any ATV with a 4x110 factory stud pattern where you are trying to use 4x137 WHEELS. A wider wheelbase on your bike will offer more stability for jumping and cornering, and also allow you to add larger wheels without lifting your bike.
Please measure your studs (110mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (137mm diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 4x110 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Below some of the models these will fit:
Arctic Cat:
2007-2008 250 2WD/4WD
2007-2008 DVX 250 2WD/4WD Rear
2009-2012 DVX 300 2WD Rear
2004-2008 DVX 400 2WD Rear
Can-Am/Bombardier:
1999-2005 Traxter 500 4WD
2000-2005 Quest 500 4WD
2002-2005 Quest 650 4WD
2007-2012 DS 450 Rear
Honda:
1990-1997 TRX 200
1985-1987 TRX 250 Big Red
1985-1986 ATC 250R
1997-2009 TRX 250 Recon
1988-2000 TRX 300-2WD/4WD
1986-1992 TRX 350 4WD
2000-2009 TRX 350 Rancher AT 4WD
2004-2009 TRX 400 Rancher AT 4WD
2004-2009 TRX 420 Rancher AT 4WD
1999-2009 TRX 400EX Rear
1996-2006 TRX 400 Foreman 4WD
1998-2004 TRX 450 Foreman 4WD
2005-2013 TRX 500 Foreman 4WD
2005-2013 TRX 450R 2WD Rear
2001-2009 TRX 500 Rubicon 4WD
2003-2007 TRX 650 Rincon
2006-2014 TRX 680 Rincon
Kawasaki:
1988-2002 220 Bayou Front
2003-2012 250 Bayou 2WD Front
2003-2005 KFX400 2WD Rear
2008-2012 KFX450R 2WD Rear
2006-2012 Brute Force 650i 4WD
2005-2014 Brute Force 750i 4WD
Suzuki:
2002-2008 Z250 2WD Rear
2002-2012 Ozark 250 2WD
2002-2007 Eiger 400
2002-2007 Eiger 400 Auto 2WD
2002-2007 Eiger 400 4WD
2002-2007 Eiger 400 Auto 4WD
2002-2007 Z250/400 2WD Rear
2008-2012 King Quad 400 4WD
2008-2012 King Quad 500 4WD
2007-2009 King Quad 450 4WD
2002-2006 Vinson 500 4WD
2006-2014 King Quad 700 4WD
2006-2014 King Quad 750 4WD
Yamaha:
1995-1998 YFB 250 Timberwolf 2WD
1999-2005 Bear Tracker 250
2006-2009 Big Bear 250
1995-2005 YFB 250 Timberwolf 4WD
2005 Bruin 250
1995-2008 YFM 350 Wolverine
1995-2008 YFM 450 Wolverine
1996-2005 Big Bear 350 2WD
1987-2008 Big Bear 350 4WD
1987-2014 Big Bear 400 4WD
2007-2014 Grizzly 350 4WD
2007-2014 Grizzly 450 4WD
2004-2006 YFM 350 Bruin 4WD
1993-2006 YFM 400 Kodiak 4WD
1993-2006 YFM 450 Kodiak 2WD/4WD
2009-2013 YFM 550 Grizzly 4WD
1998-2001 YFM 600 Grizzly
2002-2010 YFM 660 Grizzly 4WD
2007-2014 YFM 700 Grizzly 4WD
2004-2014 YFM 450 Rhino 4WD
2004-2014 YFM 660 Rhino 4WD
2004-2014 YFM 700 Rhino 4WD
Installation:
This set of spacers will fit most any ATV with 4x110 bolt spacing.. Simply remove your wheels, bolt the spacers onto the wheel studs with your existing lugs, and use the new studs and lugs to mount your new 4x137 wheels back on! It is that simple.
Warranty:
We offer a lifetime warranty on all our Spacers and Adapters!
You are buying a set of 2 HUB CENTRIC automotive wheel spacers that are 1" thick. These fit a 5x110mm stud pattern with a Center Bore of 65.1mm. This includes two spacers/rings, which is enough to widen one axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (65.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are buying a set of 2 Black HUB CENTRIC automotive wheel spacers that are 1" thick. These fit a 5x110mm stud pattern with a Center Bore of 65.1mm. This includes two spacers/rings, which is enough to widen one axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (65.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are buying a set of 4 HUB CENTRIC automotive wheel spacers that are 1" thick. These fit a 5x110mm stud pattern with a Center Bore of 65.1mm. This includes four spacers/rings, which is enough to widen two axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (65.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.