You are buying a set of 2 HUBCENTRIC automotive wheel adapters (and spacers), These spacers are 20mm thick (one spacer in the kit for each wheel on the vehicle and this comes with lug nuts). The 20mm wheel spacers/adapter will fit most any vehicle with a 5 x 4.75 wheel stud pattern, M12x1.5 studs and a 72.56mm Center Bore where you are trying to use 5x4.5 WHEELS.
These Adapters are compatible to BMW 72.56mm Hub Bore and have a Lip of 60.1mm to fit any wheels safely with the correct hub-centric ring.
Please measure your studs (4.75" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.5" diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 5x4.75 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.
We offer a lifetime warranty on all our products. Most other sellers to NOT offer this.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are purchasing a set of 4 ATV wheel spacers adapters, enough to widen wo axles 2.00" total (one spacer in the kit for each wheel on the axle). These wheel spacers are 1.00" per side will fit most any ATV with a 4x110 factory stud pattern where you are trying to use 4x137 WHEELS. A wider wheelbase on your bike will offer more stability for jumping and cornering, and also allow you to add larger wheels without lifting your bike.
Please measure your studs (110mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (137mm diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 4x110 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Below some of the models these will fit:
Can-Am/Bombardier:
2000-2005 Quest 500 4WD
2002-2005 Quest 650 4WD
2007-2012 DS 450 Rear
Honda:
2004-2009 TRX 400 Rancher AT 4WD
2004-2009 TRX 420 Rancher AT 4WD
1996-2006 TRX 400 Foreman 4WD
1998-2004 TRX 450 Foreman 4WD
2005-2013 TRX 500 Foreman 4WD
2001-2009 TRX 500 Rubicon 4WD
2003-2007 TRX 650 Rincon
2006-2014 TRX 680 Rincon
Kawasaki:
2008-2012 KFX450R 2WD Rear
2006-2012 Brute Force 650i 4WD
2005-2014 Brute Force 750i 4WD
Suzuki:
2008-2012 King Quad 400 4WD
2008-2012 King Quad 500 4WD
2007-2009 King Quad 450 4WD
2006-2014 King Quad 700 4WD
2006-2014 King Quad 750 4WD
Yamaha:
1987-2008 Big Bear 350 4WD
1987-2014 Big Bear 400 4WD
2007-2014 Grizzly 350 4WD
2007-2014 Grizzly 450 4WD
2009-2013 YFM 550 Grizzly 4WD
2002-2010 YFM 660 Grizzly 4WD
2007-2014 YFM 700 Grizzly 4WD
2004-2014 YFM 450 Rhino 4WD
2004-2014 YFM 660 Rhino 4WD
2004-2014 YFM 700 Rhino 4WD
Installation:
This set of spacers will fit most any ATV with 4x110 bolt spacing.. Simply remove your wheels, bolt the spacers onto the wheel studs with your existing lugs, and use the new studs and lugs to mount your new 4x137 wheels back on! It is that simple.
Warranty:
We offer a lifetime warranty on all our products.
You are buying a set of 2 HUB CENTRIC automotive wheel spacers that are 1" thick. These fit a 5x110mm stud pattern with a Center Bore of 65.1mm. This includes two spacers/rings, which is enough to widen one axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (65.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are buying a set of 32pc Chrome Closed End Style Lug Nuts - 14x1.5 Thread Size - Length 1.77"
:Product Specifications:
Hex Size: 21mm or 13/16"
Lug Nut Length: 45mm (1.77 inches)
Thread Pitch: 14x1.5
Applications:
Fits many 5-lug with a M14 wheel stud.
Chevy, GMC, Ford, Dodge, Chrysler, Toyota, etc.
Important Notes:
- If your wheel studs stick out past your wheel more than 45mm (~1.77"), our closed ended lug nuts will not fit
- These are Closed End Style Lug Nuts.
- Buyers are responsible for choosing the correct Thread Type, Seat Type, & Nut Type for their application.
- Professional Installation Recommended
- Be sure to torque the lug nuts to manufacturer specifications
- Avoid using an impact wrench; improper usage may cause damage to components
- Check and re-torque after 25-50 miles of driving
You are buying a set of 2 HUB CENTRIC automotive wheel spacer adapters that are 1" thick. These fit a 5x100mm stud pattern with a Center Bore of 56.1mm and adapt 5x45 (5x114.3) wheels onto your vehicle . This includes two spacers/rings, which is enough to widen one axle 2.00" total wheel to wheel (one spacer in the kit for each wheel on the vehicle).
As shown, the hubcentric spacers (56.1mm) provide a lip to fit around the hub snugly and will have less rattling or vibrating. There is simply no comparison to the non-hub centric. See the feedback and purchase with confidence!
In summary:
Applications:
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Warranty:
We offer a lifetime warranty on all our products.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.
You are buying a set of 4 HUBCENTRIC automotive wheel adapters (and spacers), These spacers are 20mm thick (one spacer in the kit for each wheel on the vehicle and this comes with lug nuts). The 20mm wheel spacers/adapter will fit most any vehicle with a 5 x 4.75 wheel stud pattern, M12x1.5 studs and a 72.56mm Center Bore where you are trying to use 5x4.5 WHEELS with a 60.1mm wheel hub bore.
These Adapters are compatible to BMW 72.56mm Hub Bore and have a Lip of 60.1mm to fit any wheels safely with the correct hub-centric ring.
Please measure your studs (4.75" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.5" diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 5x4.75 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.
We offer a lifetime warranty on all our products. Most other sellers to NOT offer this.
Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves.