You are purchasing a set of 4 ATV wheel spacers adapters, enough to widen wo axles 2.00" total (one spacer in the kit for each wheel on the axle). These wheel spacers are 1.00" per side will fit most any ATV with a 4x110 factory stud pattern where you are trying to use 4x137 WHEELS. A wider wheelbase on your bike will offer more stability for jumping and cornering, and also allow you to add larger wheels without lifting your bike.
Please measure your studs (110mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (137mm diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 4x110 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
Below some of the models these will fit:
Can-Am/Bombardier:
2000-2005 Quest 500 4WD
2002-2005 Quest 650 4WD
2007-2012 DS 450 Rear
Honda:
2004-2009 TRX 400 Rancher AT 4WD
2004-2009 TRX 420 Rancher AT 4WD
1996-2006 TRX 400 Foreman 4WD
1998-2004 TRX 450 Foreman 4WD
2005-2013 TRX 500 Foreman 4WD
2001-2009 TRX 500 Rubicon 4WD
2003-2007 TRX 650 Rincon
2006-2014 TRX 680 Rincon
Kawasaki:
2008-2012 KFX450R 2WD Rear
2006-2012 Brute Force 650i 4WD
2005-2014 Brute Force 750i 4WD
Suzuki:
2008-2012 King Quad 400 4WD
2008-2012 King Quad 500 4WD
2007-2009 King Quad 450 4WD
2006-2014 King Quad 700 4WD
2006-2014 King Quad 750 4WD
Yamaha:
1987-2008 Big Bear 350 4WD
1987-2014 Big Bear 400 4WD
2007-2014 Grizzly 350 4WD
2007-2014 Grizzly 450 4WD
2009-2013 YFM 550 Grizzly 4WD
2002-2010 YFM 660 Grizzly 4WD
2007-2014 YFM 700 Grizzly 4WD
2004-2014 YFM 450 Rhino 4WD
2004-2014 YFM 660 Rhino 4WD
2004-2014 YFM 700 Rhino 4WD
Installation:
This set of spacers will fit most any ATV with 4x110 bolt spacing.. Simply remove your wheels, bolt the spacers onto the wheel studs with your existing lugs, and use the new studs and lugs to mount your new 4x137 wheels back on! It is that simple.
Warranty:
We offer a lifetime warranty on all our products.