Wheel Spacers

You are buying a set of 4 HUBCENTRIC automotive wheel adapters (and spacers), These spacers are 20mm thick (one spacer in the kit for each wheel on the vehicle and this comes with lug nuts). The 20mm wheel spacers/adapter will fit most any vehicle with a 5 x 4.75 wheel stud pattern, M12x1.5 studs and a 72.56mm Center Bore where you are trying to use 5x4.5 WHEELS with a 60.1mm wheel hub bore. 

These Adapters are compatible to BMW 72.56mm Hub Bore and have a Lip of 60.1mm to fit any wheels safely with the correct hub-centric ring.

Please measure your studs (4.75" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.5" diagonally two holes apart) to ensure they will fit.  The grid attached has many of the applications of the 5x4.75 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer.  Please look for your vehicle!

• Highlights of fitment (FOR THE VEHICLE - WHEELS NEED TO BE 5X4.5"):   many BMW models.See grid below, and some above for make and years, but please just measure your vehicle on both studs and spacer size

• Compatibility

• 1 Series (E82, E88) - 128i, 135i, M1, 1M Coupe
• 3 Series (E30) - M3
• 3 Series (E36) - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3
• 3 Series (E46) - 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330ci, 330i, 330xi, M3
• 3 Series (E90, E91, E92, E93) - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335d, 335i, 335is, 335xi, M3
• 5 Series (E28, E34) - 525i, 528e, 530i, 535i, 535is, 540i, M5
• 5 Series (E60, E61) - 525i, 525xi, 528i, 530i, 530xi, 535i, 535xi, 545i, 550i, M5 
• 5 Series (F07, F10) - 528i, 535i, 550i (uses 14x1.25mm lug bolts)
• 6 Series (E24, E63, E64) - 633i, 635i, 645ci, 650i, M6
• 6 Series (F12) - 650i (uses 14x1.25mm lug bolts)
• 7 Series (E23, E32, E38) - 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il
• 7 Series (E65) - 745i, 745li, 750i, 750li, 760i, 760li (uses 14x1.5mm lug bolts)
• 7 Series (F01, F02) - 740i, 740li, 750i, 750li, 760li (uses 14x1.25mm lug bolts)
• 8 Series (E31) - 840ci, 840i, 850ci, 850i

• Other BMWs
• 2004-2010 X3 (E83) (uses 14x1.5mm lug bolts)
• 2011-2012 X3 (F25) (uses 14x1.25mm lug bolts)
• 2000-2006 X5 (E53) (uses 14x1.5mm lug bolts)
• 2007-2011 X6 (X70) (uses 14x1.25mm Lug Bolts)
• 1996-2002 Z3 (Typ RC)
• 1998-2002 M-Coupe/Roadster (Typ MRC)
• 2003-2009 Z4 (E85, E89)
• 2006-2008 Z4 M Coupe/Roadster (M85)
• 2000-2003 Z8 (E52)

• You are receiving 4 pieces/rings with a hole pattern of 5x4.75 or 5x120.7mm but a STUD PATTERN OF 5x4.5 or 5x114.3mm.  These are adapters and spacers, so they change the pattern of studs.
• Studs are M12x1.5 and there is a 72.56mm hub center bore and a 60.1mm wheel center bore.  If your lug nuts are different for your wheel, you could need to purchase new lugs.  Please check your stud thread pattern!
• Thickness is 20mm per spacer for 40mm wheel to wheel!
• You receive lug nuts (M12x1.5) as well.  5 per ring as expected.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available.  Each set is hand tested and commercially packed.

Installation should be professionally done.  Follow procedures outlined in the installation document carefully for safety.

We offer a lifetime warranty on all our products.  Most other sellers to NOT offer this.

Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves. 

• We provide a lifetime warranty
• We guarantee YOUR satisfaction! 
• Thousands of clients are currently enjoying these spacers, and they are riding with confidence! Do not let other sellers confuse you with their listings, because they cannot compete with our price points. We manufacture thousands of sets of all types of spacers at a time with a proven design, which results in a great deal for YOU!

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen two axles 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The adapters will fit most any vehicle with a 5x108 or 5x4.25 wheel stud pattern where you are trying to use. Center bore: 73.1mm & Thread Pitch: 12x1.5

Adapts to 5x114.3 / 5x4.5 Wheels

Please measure your studs (5.0" diagonally) first to be sure on your vehicle, then measure your wheel holes (4.5" diagonally) to ensure they will fit. The grid attached has many of the applications of the 5x108mm / 5x4.25 bolt pattern on the vehicle, but remember to check your wheels to as this is a conversion kit, not just a spacer.

Warranty:

We offer a lifetime warranty on all our products.

Fits:

Ford:

2013-2017 Ford C-Max
2010-2016 Ford Focus (5-Lug Only)
1986-1996, 1998 - 2012 Ford Taurus
1989-1995 Ford Thunderbird (Super Coupe Coupe 2-Door ONLY)
2002-2005 Ford Thunderbird
2010-2017 Ford Transit Connect
1995-2003 Ford Windstar

Jaguar:

2014-2017 Jaguar F-Type
2000-2008 Jaguar S-Type
2010-2016 Jaguar XJ
2014-2016 Jaguar XJR
2009-2017 Jaguar XF
2010-2015 Jaguar XFR
2013-2015 Jaguar XFR-S
2007-2015 Jaguar XK
2008-2015 Jaguar XKR
2012-2015 Jaguar XKR-S
2002-2008 Jaguar X-Type

Lincoln:

1988-2002 Lincoln Continental
2000-2006 Lincoln LS
1993-1998 Lincoln Mark VIII
2013-2016 Lincoln MKZ

Volvo:

2008-2010 Volvo C30
1998-2010 Volvo C70
2005-2010 Volvo S40
2001-2012 Volvo S60
2001-2010 Volvo S80
2005-2010 Volvo V50
2000-2010 Volvo V70
2003-2010 Volvo XC70
2004-2010 Volvo XC90

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen two axles 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The adapters will fit most any vehicle with a 5x108 or 5x4.25 wheel stud pattern where you are trying to use. Center bore: 73.1mm & Thread Pitch: 12x1.5

Adapts to 5x114.3 / 5x4.5 Wheels

Please measure your studs (5.0" diagonally) first to be sure on your vehicle, then measure your wheel holes (4.5" diagonally) to ensure they will fit. The grid attached has many of the applications of the 5x108mm / 5x4.25 bolt pattern on the vehicle, but remember to check your wheels to as this is a conversion kit, not just a spacer.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.

Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.

Warranty:

We offer a lifetime warranty on all our products.

Fits:

Ford:

2013-2017 Ford C-Max
2010-2016 Ford Focus (5-Lug Only)
1986-1996, 1998 - 2012 Ford Taurus
1989-1995 Ford Thunderbird (Super Coupe Coupe 2-Door ONLY)
2002-2005 Ford Thunderbird
2010-2017 Ford Transit Connect
1995-2003 Ford Windstar

Jaguar:

2014-2017 Jaguar F-Type
2000-2008 Jaguar S-Type
2010-2016 Jaguar XJ
2014-2016 Jaguar XJR
2009-2017 Jaguar XF
2010-2015 Jaguar XFR
2013-2015 Jaguar XFR-S
2007-2015 Jaguar XK
2008-2015 Jaguar XKR
2012-2015 Jaguar XKR-S
2002-2008 Jaguar X-Type

Lincoln:

1988-2002 Lincoln Continental
2000-2006 Lincoln LS
1993-1998 Lincoln Mark VIII
2013-2016 Lincoln MKZ

Mercury:

1989-1997 Mercury Cougar
2004-2007 Mercury Monterey
1986-2009 Mercury Sable

Volvo:

2008-2010 Volvo C30
1998-2010 Volvo C70
2005-2010 Volvo S40
2001-2012 Volvo S60
2001-2010 Volvo S80
2005-2010 Volvo V50
2000-2010 Volvo V70
2003-2010 Volvo XC70
2004-2010 Volvo XC90

You are buying a set of 4 automotive wheel adapters (and spacers), enough to widen two axles 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The adapters will fit most any vehicle with a 5x108 or 5x4.25 wheel stud pattern where you are trying to use. Center bore: 73.1mm & Thread Pitch: 12x1.5

Adapts to 5x114.3 / 5x4.5 Wheels

Please measure your studs (5.0" diagonally) first to be sure on your vehicle, then measure your wheel holes (4.5" diagonally) to ensure they will fit. The grid attached has many of the applications of the 5x108mm / 5x4.25 bolt pattern on the vehicle, but remember to check your wheels to as this is a conversion kit, not just a spacer.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.

Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.

Warranty:

We offer a lifetime warranty on all our products.

Fits:

Ford:

2013-2017 Ford C-Max
2010-2016 Ford Focus (5-Lug Only)
1986-1996, 1998 - 2012 Ford Taurus
1989-1995 Ford Thunderbird (Super Coupe Coupe 2-Door ONLY)
2002-2005 Ford Thunderbird
2010-2017 Ford Transit Connect
1995-2003 Ford Windstar

Jaguar:

2014-2017 Jaguar F-Type
2000-2008 Jaguar S-Type
2010-2016 Jaguar XJ
2014-2016 Jaguar XJR
2009-2017 Jaguar XF
2010-2015 Jaguar XFR
2013-2015 Jaguar XFR-S
2007-2015 Jaguar XK
2008-2015 Jaguar XKR
2012-2015 Jaguar XKR-S
2002-2008 Jaguar X-Type

Lincoln:

1988-2002 Lincoln Continental
2000-2006 Lincoln LS
1993-1998 Lincoln Mark VIII
2013-2016 Lincoln MKZ

Mercury:

1989-1997 Mercury Cougar
2004-2007 Mercury Monterey
1986-2009 Mercury Sable

Volvo:

2008-2010 Volvo C30
1998-2010 Volvo C70
2005-2010 Volvo S40
2001-2012 Volvo S60
2001-2010 Volvo S80
2005-2010 Volvo V50
2000-2010 Volvo V70
2003-2010 Volvo XC70
2004-2010 Volvo XC90

You are buying a set of 2 HUBCENTRIC automotive wheel adapters (and spacers), These spacers are 20mm thick (one spacer in the kit for each wheel on the vehicle and this comes with lug nuts). The 20mm wheel spacers/adapter will fit most any vehicle with a 5 x 4.75 wheel stud pattern, M12x1.5 studs and a 72.56mm Center Bore where you are trying to use 5x4.5 WHEELS. 

These Adapters are compatible to BMW 72.56mm Hub Bore and have a Lip of 60.1mm to fit any wheels safely with the correct hub-centric ring.

Please measure your studs (4.75" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.5" diagonally two holes apart) to ensure they will fit.  The grid attached has many of the applications of the 5x4.75 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer.  Please look for your vehicle!

• Highlights of fitment (FOR THE VEHICLE - WHEELS NEED TO BE 5X4.5"):   many BMW models.See grid below, and some above for make and years, but please just measure your vehicle on both studs and spacer size

• Compatibility

• 1 Series (E82, E88) - 128i, 135i, M1, 1M Coupe
• 3 Series (E30) - M3
• 3 Series (E36) - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3
• 3 Series (E46) - 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330ci, 330i, 330xi, M3
• 3 Series (E90, E91, E92, E93) - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335d, 335i, 335is, 335xi, M3
• 5 Series (E28, E34) - 525i, 528e, 530i, 535i, 535is, 540i, M5
• 5 Series (E60, E61) - 525i, 525xi, 528i, 530i, 530xi, 535i, 535xi, 545i, 550i, M5 
• 5 Series (F07, F10) - 528i, 535i, 550i (uses 14x1.25mm lug bolts)
• 6 Series (E24, E63, E64) - 633i, 635i, 645ci, 650i, M6
• 6 Series (F12) - 650i (uses 14x1.25mm lug bolts)
• 7 Series (E23, E32, E38) - 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il
• 7 Series (E65) - 745i, 745li, 750i, 750li, 760i, 760li (uses 14x1.5mm lug bolts)
• 7 Series (F01, F02) - 740i, 740li, 750i, 750li, 760li (uses 14x1.25mm lug bolts)
• 8 Series (E31) - 840ci, 840i, 850ci, 850i

• Other BMWs
• 2004-2010 X3 (E83) (uses 14x1.5mm lug bolts)
• 2011-2012 X3 (F25) (uses 14x1.25mm lug bolts)
• 2000-2006 X5 (E53) (uses 14x1.5mm lug bolts)
• 2007-2011 X6 (X70) (uses 14x1.25mm Lug Bolts)
• 1996-2002 Z3 (Typ RC)
• 1998-2002 M-Coupe/Roadster (Typ MRC)
• 2003-2009 Z4 (E85, E89)
• 2006-2008 Z4 M Coupe/Roadster (M85)
• 2000-2003 Z8 (E52)

• You are receiving 2 pieces/rings with a hole pattern of 5x4.75 or 5x120.7mm but a STUD PATTERN OF 5x4.5 or 5x114.3mm.  These are adapters and spacers, so they change the pattern of studs.
• Studs are M12x1.5 and there is a 72.56mm hub center bore and a 60.1mm wheel center bore.  If your lug nuts are different for your wheel, you could need to purchase new lugs.  Please check your stud thread pattern!
• Thickness is 20mm per spacer for 40mm wheel to wheel!
• You receive lug nuts (M12x1.5) as well.  5 per ring as expected.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available.  Each set is hand tested and commercially packed.

Installation should be professionally done.  Follow procedures outlined in the installation document carefully for safety.

We offer a lifetime warranty on all our products.  Most other sellers to NOT offer this.

Bar none, we are the number one seller of wheel spacers on eBay. Simply check our feedback and sales history, and you will see that the results clearly speak for themselves. 

• We provide a lifetime warranty
• We guarantee YOUR satisfaction! 
• Thousands of clients are currently enjoying these spacers, and they are riding with confidence! Do not let other sellers confuse you with their listings, because they cannot compete with our price points. We manufacture thousands of sets of all types of spacers at a time with a proven design, which results in a great deal for YOU!