4 QTY Wheel Spacers Adapters 1.5" 5x135 vehicle to 5x5.5 wheel bolt patterns with 14x2 threads - Compatible with Ford 1997-2002 Expedition 1997-2003 F150 F-150 Lincoln Navigator Blackwood

You are buying a set of 4 automotive wheel adapters (and spacers), enough to widen two axles 3.00" total wheel to wheel at 1.50" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 3.00" ATV wheel spacers are 1.50" per side and will fit most any vehicle with a 5 x 135 stud pattern where you are trying to use.

5x5.5 / WHEELS

Please measure your studs (135mm diagonally) on your vehicle first to be sure on your vehicle, then measure your wheel holes (5.5" diagonally) to ensure they will fit. There are many applications of the 5x135mm bolt pattern on the vehicle, but remember to check your wheels too to as this is a conversion kit, not just a spacer. Please look for your vehicle and wheels to be 100% sure!

- You are receiving 4 pieces/rings with hole patter for the vehicle of 5x135mm and outgoing stud pattern of 5x5.5"
- Thickness is 1.5" per spacer for 3" wheel to wheel!
- Studs are M14-2.0. If your lug nuts are different for your vehicle, you could need to purchase new lugs. If your vehicle is M14-2.0, you can use these lug nuts to apply. If not, you will need to purchase lug nuts for the spacer and possibly the wheel.
- Center bore is 87.1mm
- Our studs protrude 1.3" from the spacer as your factor lugs extend from your rims.
- Vehicle studs can not extend past the adapter. They could need to be trimmed if they do.
- We can only guarantee that the adapter is as described above. We can not assure it fits your vehicle. You must measure to be positive!
- These should be professionally installed and torqued properly. Follow installation documentation for safety.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.