Description
You are buying a set of
4 automotive wheel adapters (and spacers), enough to widen two axles 2.00" total wheel to wheel at
1.00" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 2.00" ATV wheel adapters spacers are
1.00" per side and will fit most any vehicle with a 5 x 100mm wheel stud pattern where you are trying to use 5 x 112mm WHEELS.
Please measure your studs (100 mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (112 mm diagonally two holes apart) to ensure they will fit. There multiple applications of the 5x100 bolt pattern, please remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
- Highlights of fitment: Volkswagen Beetle and Jetta and Audi TT
- You are receiving 4 pieces/rings with hole pattern of 5x100 mm for the rim to attach and a bolt patter for your wheel of 5x112mm
- Studs are M12x1.5 and there is a 57.1mm center bore. If your lug nuts are different for your wheel, you could need to purchase new lugs.
- Thickness is 1.00" per spacer for 2.00" wheel to wheel stance increase!
- Our studs protrude 1.3" from the spacer as your factor lugs extend from your rims.
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.
Please measure your studs (100 mm diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (112 mm diagonally two holes apart) to ensure they will fit. There multiple applications of the 5x100 bolt pattern, please remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!
- Highlights of fitment: Volkswagen Beetle and Jetta and Audi TT
- You are receiving 4 pieces/rings with hole pattern of 5x100 mm for the rim to attach and a bolt patter for your wheel of 5x112mm
- Studs are M12x1.5 and there is a 57.1mm center bore. If your lug nuts are different for your wheel, you could need to purchase new lugs.
- Thickness is 1.00" per spacer for 2.00" wheel to wheel stance increase!
- Our studs protrude 1.3" from the spacer as your factor lugs extend from your rims.
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.
Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.
Additional
| Brand | Hardcore Parts® |
|---|---|
| SKU | 5x100-5x112-1-0-4QTY |
| Package Quantity | 4 |
| Wheel Bolt Pattern | 5x112 |
| Vehicle Bolt Pattern | 5x100 |
| Thickness | 1" |
| Thread Pitch | M12-1.5 |
| Center Bore Size | 57.1 mm |
| Hub Centric (Yes or No) | No |
| Material | Forged T6 6061 Aircraft Grade Aluminum |
| Surface Finish Color | CNC Machined Polished Aluminum Finish |
| Length (in) | No |
| Width (in) | No |
| Height (in) | No |
| Placement on Vehicle | Front , Left, Rear, Right |
| OEM Part # | No |
- Be the first to review this product
Write Your Own Review
