2 QTY Wheel Spacers Adapters 1.25" fits all 6x4.5 (6x114.3) vehicle to 6x5.5 wheel patterns with 1/2-20 threads

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen two axles 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 2.50" ATV wheel spacers are 1.25" per side and will fit most any vehicle with a 6 x 4.5 (6x114.3mm) wheel stud pattern where you are trying to use 6x5.5 (6x139.7mm) WHEELS.

Please measure your studs (4.50" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (5.5" diagonally two holes apart) to ensure they will fit. The grid attached has many of the applications of the 6x4.5 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!

- Highlights of fitment: Dodge Durango, Viper- Nissan Frontier, (6x5.5" or 6x139.7mm) wheels
- You are receiving 2 pieces/rings with hole pattern of 6x4.5 or 6x114.3mm for the rim to attach and a bolt patter for your wheel of 6x5.5" or 6x139.7mm
- Studs are 1/2"-20 and there is a 72mm center bore. If your lug nuts are different for your wheel, you could need to purchase new lugs
- Thickness is 1.25" per spacer for 2.5" wheel to wheel stance increase!
- Our studs protrude 1.3" from the spacer as your factor lugs extend from your rims.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.

Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.