2 QTY Wheel Spacers Adapters 1.25" fits all 5x4.75 vehicle to 5x4.5 wheel patterns with 12x1.5 threads

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen two axles 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 2.50" wheel spacers are 1.25" per side and will fit most any vehicle with a 5 x 4.75 wheel stud pattern with M12x1.5 studs where you are trying to use 5 x 4.5 WHEELS

Please measure your studs (4.75" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.5" diagonally two holes apart) to ensure they will fit. The list below shows many of the applications of the 5x4.75 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!

Highlights Of Fitment: FOR THE VEHICLE - WHEELS NEED TO BE 5X4.5"

For specific model years:

Chevrolet
- Camaro: 82-02 - MAKE SURE YOUR STUDS ARE NOT 1/2". IF THEY ARE, YOU WILL NEED NEW LUG NUTS
- Caprice: 80 - 89
- Chevelle: 64 - 73
- Corvette: 88 - 14
- Impala: 59 - 70
- Nova: 69 - 75
- S10: 82 - 04 (ONLY THE 2WD, AND ONLY THE REAR)
- S10 Blazer: 83 - 94 (ONLY THE 2WD, AND ONLY THE REAR)

GMC
- S15: 1982 - 1990
- S15 Jimmy: 1983 - 1991
- Sonoma: 1991 - 2004 (ONLY THE 2WD, AND ONLY THE REAR)

Pontiac
- Firebird: 1967 - 2002 (ONLY THE 2WD, AND ONLY THE REAR) - GTO: 1967 - 1973 (ONLY THE 2WD, AND ONLY THE REAR) Cadillac
- Eldorado: 1979 - 1985 - XLR: 2004 - 2009