You are buying a set of 4 automotive wheel adapters (and spacers), enough to widen one axle 3.00" total wheel to wheel at 1.50" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 3.00" ATV wheel spacers are 1.50" per side and will fit most any vehicle with a 5 x 5.5 (5x139.7) stud pattern where you are trying to use.
5x114.3 / 5x4.5 WHEELS
Please measure your studs (5.5" diagonally) on your vehicle first to be sure on your vehicle, then measure your wheel holes (4.5" diagonally) to ensure they will fit. This is a conversion kit, not just a spacer. Please look for your vehicle and wheels to be 100% sure!
- You are receiving 4 pieces/rings with hole patter for the vehicle of 5x5.5 or 5x139.7mm and outgoing stud pattern of 5x4.5 or 5x114.3
- Studs are 1/2"-20 and there is a 87.1 mm hub.
If your lug nuts are different for your vehicle, you could need to purchase new lugs. If your vehicle is 1/2-20, you can use these lug nuts to apply. If not, you will need to purchase lug nuts for the spacer and possibly the wheel.
- Vehicle studs can not extend past the adapter. They could need to be trimmed if they do.
- We can only guarantee that the adapter is as described above. We can not assure it fits your vehicle. You must measure to be positive!
- These should be professionally installed and torqued properly. Follow installation documentation for safety.
Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum. Each set is hand tested and commercially packed.
We offer a lifetime warranty on all our products. Other sellers do not do this.
|Wheel Bolt Pattern||5x4.5|
|Vehicle Bolt Pattern||5x5.5|
|Center Bore Size||87.1 mm|
|Hub Centric (Yes or No)||No|
|Material||Forged T6 6061 Aircraft Grade Aluminum|
|Surface Finish Color||CNC Machined Polished Aluminum Finish|
|Placement on Vehicle||Front , Left, Rear, Right|
|OEM Part #||No|